The JS-WP300HDRX is a twisted pair signal Extender suitable for Wall installation. It can convert signals into HDMI signals through the network input at the back end and input them to the display device. It is used in conjunction with the JS-HDBI series junction box. Achieve long-distance(100 meters) transmission of HD signals. The device not only can transmit high-definition image signals, but also supports HDCP and CEC functions. For high-resolution digital signals with extremely high image resolution, this Extender can perfectly increase other output distances from the cost of network solution vendors.
MODEL
|
JS-WP300HD |
Dimensions |
Panel:157mm*131mm R=16mm |
VIDEOAUDIO |
Input: 15 pin VGA and HDMI
VGA Input Signal Level Range: 1.0Vp-p
VGA Input Impedance: 75 ohms
Resolution Support: up to 1920 x 1080P @ 60Hz
Data Rate(Max): 4.95Gbps (R.G.B each 1.65 Gbps)
Clock Jitter: <0.2UI
Transmission Delay (Max):5ns (±1ns)
Signal Type: DVI-D TMDS signal in DVI1.0 standard
Signal Strength T.M.D.S: 800mVp-p
DDC: Built-in
HDCP: Support HDCP1.1
Output: RJ45
Output Signal Level Range: 1000mV
Output Impedance: 100 ohms
Data Rate: 20 Gbps
Twisted Pair Cable Length: Up to 100 meters
|
AUDIO |
Gain: 0dB
THD+N (Total Harmonic Distortion plus Noise): 0.05% @1kHz (Rated Voltage)
Frequency Response:20Hz-20KHz
CMRR: >75dB @ 20Hz-20KHz
Input: Stereo Analog, S/PDIF
Input Connector: 3.5mm audio, HDMI type A
Input Impendance: >10k omhs
Input Level(Max): +21 dBu
|
ENVIROMENTAL |
Power: ≤20W
Temperature (Storage): -20° to 150°C
Temperature (Operating): -10° to 55°C
Humidity: 20% to 50%, RHL non-condensing
|